Hilti SID 6-22 Mode D'emploi page 24

Technical data
Product generation
Rated voltage
Weight in accordance with EPTA procedure 01, without bat-
tery
Torque adjustment
Rated speed under no load
Impact speed
Large standard bolts
Large high-strength bolts
Tool holder
Storage temperature
Ambient temperature for operation
Noise information and vibration values
The sound pressure and vibration values given in these instructions were measured in accordance
with a standardized test and can be used to compare one power tool with another. They can also be
used for a preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used
for different applications, with different accessory tools, or is poorly maintained, the data can vary.
This can significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is
switched off, or when it is running but not actually being used for a job. This can significantly reduce
exposure over the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration,
for example: maintaining the power tool and accessory tools, keeping the hands warm, organization
of work patterns.
Detailed information on the versions of the EN 62841 standards applied here is to be found in
the reproduction of the declaration of conformity
Noise information
Sound power level (L
Uncertainty for the sound pressure level (K
Emission sound pressure level (L
Uncertainty for the sound power level (K
Total vibration
Vibration emission value when tightening screws/bolts and
nuts of the maximum permitted size (a
Uncertainty for tightening screws/bolts and nuts of the maxi-
mum permitted size
20
)
WA
)
pA
)
h
Setting I
Setting II
Setting III
215.
)
pA
)
WA
2274161
02
21.6 V
1.0 kg
3 settings
0 /min ... 1,800 /min
0 /min ... 2,700 /min
0 /min ... 3,600 /min
≤ 4,250 bpm
M8 to M16
M6 to M12
¹⁄₄" hex socket with locking
sleeve
−20 ℃ ... 70 ℃
−17 ℃ ... 60 ℃
SID 6-22
102 dB
3 dB
94 dB
3 dB
13.4 m/s²
1.5 m/s²
*2274161*