Glem Gas GTH32T Manuel D'instruction page 45

HOW TO USE
1. Start Cooking
After power on, the buzzer beeps once, all the indicators light up for 1 second then go out, indicating
that the ceramic hob has entered the stat of standby mode.
1. Touch the ON/OFF control. all the indicators
show "-"
3. Touching the heating zone selection control.
2. Finish Cooking
1. Touching the heating zone selection control that
you wish to switch off.
3. Touch the ON/OFF control. all the indicators show "-".
2. Place a suitable pan on the cooking zone
that you wish to use.
• Make sure the bottom of the pan and the surface of
the cooking zone are clean and dry.
4. Select a heat setting by touching the "-" or "+"
control.
• If you choose level 0, within 1 minute, the ceramic
hob will automatically switch off. You will need to start
again at step 1.
• You can modify the heat setting at any time during
cooking.
• By holding down either of these buttons, the value
will adjust up or down.
2. Turn the cooking zone o by scrolling down to "0" or
touching "-" and "+" control together.
or
OPERATION INSTRUCTIONS
45