Glem Gas GTH32T Manuel D'instruction page 41

D
A (mm)
760
WARNING: Ensuring Adequate Ventilation
Make sure the ceramic hob is well ventilated and that air inlet and outlet are not blocked. In order to avoid
accidental touch with the overheating bottom of the hob, or getting unexpectable electric shock
during working, it is necessary to put a wooden insert, fixed by screws, at a minimum distance of 50mm from
the bottom of the hob. Follow the requirements below.
There are ventilation holes around outside of the hob. YOU MUST ensure these holes are not blocked by
the worktop when you put the hob into position.
• Be aware that the glue that join the plastic or wooden material to the furniture, has to resist to temperature
not below 150°C, to avoid the unstuck of the paneling.
• The rear wall, adjacent and surrounding surfaces must therefore be able to withstand an temperature of
90°C.
A
B
E E
C
B (mm)
50 minimum
Min. 5 mm
C (mm)
20 minimum
min. 50 mm
Max. 5 mm
PRODUCT INSTALLATION
mur
min. 30 mm
D
Air intake Air exit 5mm
E
41