Nice E EASYPLUS M 817 SH Instructions Et Avertissements Pour L'installation Et L'utilisation page 10

5.13 - Programming the movement (Ascent or Descent) that the motor must perform
automatically when it starts to rain (ref. paragraph 6.1.4)
Before starting the procedure, move the shutter/awning to the mid-point of its stroke.
01. Keep the n key pressed and wait for the motor to perform 2 movements. Upon completion, release the key.
02. Keep the t key pressed and wait for the motor to perform 3 movements. Upon completion, release the key.
03. Keep the n key pressed and wait for the motor to perform 2 movements. Upon completion, release the key.
04. Programme the movement that the motor must perform automatically when it starts to rain, by selecting one of the following options:
• to programme the Raising of the shutter (or awning): keep the s key pressed and wait for the motor to perform 3 movements.
Upon completion, release the key.
• to programme the Lowering of the shutter (or awning): keep the t key pressed and wait for the motor to perform 3 movements.
Upon completion, release the key.
01
5
sec.
=
=
N.B. – When performing the procedure, you can cancel the programming at any time by keeping the n and t keys pressed simultaneously for 4 seconds Alternatively,
do not press any keys and wait 60 seconds for the motor to perform 6 movements.
01
PRG
1
sec.
04
5
2
sec.
9 – English
02
2
04
5
sec.
04
5
sec.
––– Procedure 5.12 ––– executable only with a series transmitter Era P and Era W
02
PRG
1
2
sec.
5
3
sec.
3
3
03
5
2
sec.
05
=
5
sec.
05
=
5
sec.
03
5
2
sec.
3
3
3