If you do not place a pot on any of the
cooking zones within 5 seconds, the
function deactivates automatically.
6. Set a timer function, if needed.
Once the pan reaches the intended
temperature an acoustic signal sounds. You
can put oil and food inside the pan now.
To stop the function press 0 on the control
bar or press
.
If you set a Count Down Timer on one of the
cooking zones and the set time runs out
before the intended temperature is reached
the function deactivates automatically.
Hints and tips:
• You can change the default heat level, if
needed.
• For thick pieces of food or raw potatoes
use a lid during the first 10 min of frying.
• Heavy and / or large pans may take longer
to heat up.
• Use laminated pans with low heat level to
prevent overheating and damage of the
cookware.
• Do not use thin enamelled cookware. It
can be overheated and damaged.
Correct pans for SenseFry function
Use only pans with flat bottoms. To check if
the pan is correct:
1. Put your pan upside down.
2. Put a ruler on the bottom of the pan.
3. Try to put a coin of 1, 2, or 5 Euro Cent
(or any coin with similar thickness,
approx. 1.7 mm) between the ruler and
the bottom of the pan.
a. The pan is incorrect if you can put the
coin between the ruler and the pan.
b. The pan is correct if you cannot put
the coin between the ruler and the
pan.
6.10 SenseBoil®
The function automatically adjusts the
temperature of water so that it does not boil
over once it reaches the boiling point.
If there is any residual heat (
on the cooking zone you want to use, an
acoustic signal sounds and the function
does not start.
The function does not work with non-stick
cookware.
CAUTION!
Do not use the function with empty
cookware.
Do not leave the hob unattended while
the function is operating.
1. Place pots filled with 1 - 5 l of cold water
on the available cooking zones for which
you want to start the function.
If you place one pot on only one cooking
zone the function starts automatically.
2. Touch
to activate the hob.
3. Touch
to activate the function.
A blinking indicator above
each cooking zone on which you can
presently use the function.
4. Touch anywhere on the slider of the
chosen cooking zone.
/
/
)
appears for
ENGLISH
13