AEG NII74B30FB Notice D'utilisation page 14

The function starts.
Once the function starts the indicators above
the slider appear and the animation starts
running.
If you do not place a pot on any of the
cooking zones within 5 seconds, the
function deactivates automatically.
When the function reaches the boiling point
the hob emits an acoustic signal and the heat
setting automatically changes to a default
simmering level.
To deactivate the function before the boiling
point has been reached, touch
To deactivate the function after the boiling
point has been reached, touch the slider and
adjust the heat setting manually.
If you activate Pause or remove the pot the
function deactivates.
If you set a Count Down Timer on one of the
cooking zones and the set time runs out
before the boiling point is reached the
function deactivates automatically.
Hints and tips:
• The function is best suited for boiling
water and cooking potatoes.
• The function may not work properly for
kettles and stovetop espresso pots.
• Fill between half to three quarters of the
pot with cold tap water leaving 4 cm from
the rim of the pot empty. Do not use less
than 1 l or more than 5 l of water. Make
sure the total weight of the water (or the
water and potatoes) ranges between 1-5
kg.
max. 5l / 5kg / 75%
min. 1l / 1kg / 50%
• To achieve the best results cook only
whole, unpeeled, medium-sized potatoes.
Make sure you do not pack potatoes too
tightly.
14 ENGLISH
• During the heat up phase avoid energetic
stirring of other pots and parallel cooking
processes (such as frying or boiling) on
other cooking zones.
• Avoid producing external vibrations (e.g.
from using a blender or placing a mobile
phone next to the hob) when the function
is running.
• Depending on the type of food and
cookware you can adjust the heat setting
after the boiling point has been reached.
• Add salt once the boiling point has been
reached.
• Use a lid to save energy.
6.11 Menu structure
or 0.
The table shows the basic menu structure.
User settings
Sym‐
bol
b
P
H
E
To enter user settings: press and hold
for 3 seconds. Then, press and hold
settings appear on the timer of the left
cooking zones.
Navigating the menu: the menu consists of
the setting symbol and a value. The symbol
appears on the rear timer and the value
appears on the front timer. To navigate
between the settings press
timer. To change the setting value press
or on the front timer.
To exit the menu: press
OffSound Control
You can activate / deactivate the sounds in
the Menu > User settings.
Refer to "Menu structure".
Setting Possible options
Sound On / Off (--)
Power limitation 15 - 73
Hood mode 0 - 6
Alarm / error histo‐ The list of recent
ry alarms / errors.
.
. The
on the front