cecotec CONGA 4000 Carpet&Spot Clean XL Advance Manuel D'instructions page 9

stated on the appliance marking and that the wall outlet is
earthed.
- Always use the plug provided with the appliance. Do not
modify the plug provided with the appliance if it does not
match the power socket.
- Check the power cord regularly for visible damage. If the
cable is damaged, it must be replaced by the official Cecotec
Technical Support Service in order to avoid any type of
danger.
- Do not operate the appliance if its cord, plug, or structure
show visible damage, do not operate properly, or produce
unusual sounds or odours.
- In case of malfunctioning, repairs must be carried out by
Cecotec's Technical Support Service; otherwise, the warranty
will be void.
- To unplug the appliance, pull from the socket, never from the
cord.
- Do not immerse the cable, plug, or any other part of the
appliance in water or any other liquid or expose electrical
connections to water. Make sure your hands are dry before
handling the plug or switching on the appliance.
- Disconnect the appliance from the electric circuit when it is
not used.
- Disconnect the appliance from the power socket before
carrying out any maintenance, cleaning, or transport.
- Do not use the appliance with pesticides, dyes, lubricants, or
other liquids.
- Do not use the appliance to vacuum lit matches, cigarette
ends, petrol gas, sources of heat, or hot ash.
- Do not use the appliance without installing the waste-water
tank.
- The appliance is designed to clean carpets and upholstery,
do not use it for any other purpose.
CONGA 4000 CARPET&SPOT CLEAN XL ADVANCE
9