First try the solutionssuggested
here or visit our website
and reference
FAQs (Frequently
Asked Questions)
to possibly
avoid the cost of a service call.
In the U.S.A., www.whirlpool.corn
In Canada, www.whirlpool.ca
Operation
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
The refrigerator will not
operate
Check electrical supply
Plug the power cord into a grounded 3 prong outlet.
Do not use an extension cord.
Make sure there is power to the outlet. Plug in a lamp to see
if the outlet is working.
Reset a tripped circuit breaker. Replace any blown fuses.
NOTE: If problems continue, contact an electrician.
Check controls
Make sure the controls are turned on. See "Using the
Control(s)."
New installation
Allow 24 hours following installation for the refrigerator to
cool completely.
NOTE: Adjusting the temperature
controls to the coldest
setting will not cool either compartment
more quickly.
Refrigerator Control is in Showroom
If the refrigerator is in Showroom mode, cooling is turned off
mode (on some models)
and "Showroom" will be illuminated on the control panel. See
"Using the Control(s)" for more information.
30