Publicité
Les langues disponibles
Les langues disponibles
Playback of a video CD (CDs) without P. B. C. (Version 1.1)
1
Turn on the TV and set the input selector to "VCR".
2
Press the ON/STAND-BY button to turn the power on.
3
Press the CD/VIDEO CD (CD) button.
4
Press the
OPEN/CLOSE button to open the disc tray.
5
Place the video CD(s) on the disc tray, label side up.
When loading a third disc, press the DISC SKIP button to turn the
disc tray, then place the video CD in the open position.
! Video CDs can be placed in any open position in the disc tray.
! Be sure to place 8 cm (3") Video CD(s) in the middle of the disc positions.
6
Press the
OPEN/CLOSE button to close the disc tray.
Total number of tracks on the
video CD whose number is flashing
7
To select the video CD you want to listen to first, press the DISC
SKIP button.
8
Press the
/
(
/SELECT/RESUME) button to start playback.
! Playback will begin from track 1 on the disc you have selected to play. After
that disc finishes playing, the next disc will automatically start playback.
! When the last track on the third disc has finished playing, the unit will stop au-
tomatically.
! When there is no video CD in one of the disc 1 - 3 positions, the next video
CD will be played.
To interrupt playback:
Press the
button on the remote control.
To resume playback from the same point, press the
To stop playback:
Press the
( /RETURN) button.
To remove the video CDs:
Whilst in the stop mode, press the
OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press the DISC SKIP button to
rotate the disc tray and remove the remaining disc.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
General control (See page 10.)
01/7/13
CD-BK110V(X)E2.fm
CD-BK110V
Total playing time of the video CD
whose number is flashing
/SELECT/RESUME button.
ENGLISH
E-16
Publicité
