Sharp CD-BK110V Mode D'emploi page 16

Playback of a video CD (CDs) with P. B. C. (Version 2.0) (continued)
CD-BK110V
9
Select the desired menu number using the direct search buttons
on the remote control.
! Playback will begin.
! After playback has finished, the menu will reappear. Select the menu number
you want to play.
To interrupt playback:
Press the button on the remote control.
To resume playback from the same point, press the
To stop the current operation and return to the menu:
Press the ( /RETURN) button for less than 0.5 seconds.
To completely stop the video CD:
Hold down the ( /RETURN) button for more than 1 second.
To remove the video CDs:
Whilst in the stop mode, press the
The disc tray will open. Remove the two discs. Then, press the DISC SKIP button to
rotate the disc tray and remove the remaining disc.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Notes:
! Playback control allows a video CD to be played back according to instructions
recorded on the disc. The "previous", "next", "return" and "select" operations may
function differently, depending on the PBC CDs.
! Some video CDs with playback control may have an "auto pause" recorded on
them. When such a disc is played, the screen will stop automatically at the point
where an "auto pause signal" has been inserted.
! If the picture looks dirty when a video CD is played back, there may be a scratch
on the video CD. Replace it with another video CD in good condition.
The P.B.C. function will not work in the following conditions.
! When repeat, random, programme, bookmark, resume, disc digest, track digest or
time search play has been selected and playback begins.
! When track numbers are selected using the direct search, the
or / ( PREV.) button, and playback begins.
E-15 ENGLISH
/SELECT/RESUME button.
OPEN/CLOSE button.
/ (NEXT
" To move the menu screen (menu screen
with more than 1 page)
To move to the next menu screen:
Whilst in the stop mode, press the /
To return to the previous menu screen:
Whilst in the stop mode, press the /
Notes:
! This function may not work, depending on the disc.
! The
PREV. or NEXT button on the remote control allows you to locate the
desired portion.
" To play without activating the playback
control function
You can play a video CD with P.B.C. without activating the playback control function.
In this case, the menu screen will not appear, and the disc will be played in the same
way as a video CD without P .B.C.
1
Whilst in the stop mode, press the P.B.C. (P.B.C. AUTO/OFF) but-
ton to cancel the P.B.C. mode.
The P.B.C. function cannot be cancelled whilst the menu screen is displayed.
2
Press the / ( /SELECT/RESUME) button.
)
Playback will begin.
Notes:
! The P .B.C. function can also be cancelled whilst in the playback mode.
! Some video CDs with P .B.C. cannot be played back when the P.B.C. mode is off.
! See pages 16 - 22 to perform various playback functions without activating the
P.B.C. function.
01/7/13 CD-BK110V(X)E2.fm
button.
button.
<TV screen>
PBC OFF