GE GTE21GTHBB Manuel D'utilisation Et D'installation page 21

REHANG THE REFRIGERATOR DOOR
7
1. Lower the refrigerator door onto the bottom
hinge pin.
2. While holding the door securely, align the socket
in the door with the hole in the center hinge.
Attach the center hinge and gasket with two
screws with a 5/16 socket and ratchet.
3. Check to ensure the alignment between the socket
in the door and the hole in the center hinge. Insert
the hinge pin into the center hinge and tighten with
a Phillips screwdriver until the shoulder of the hinge
pin is touching the center hinge.
Installation Instructions
21
REHANG THE FREEZER DOOR
8
1. Lower the freezer door onto the center hinge pin.
2. Place the left top hinge so the pin fits into the door
socket. (Left top hinge and cover can be found
inside of the product. Call GE Appliances Service
at 800.GE.CARES (800.432.2737 or in Canada call
800.561.3344 if parts are missing.) Support the
door on the handle side and make sure the door
is straight and the gap between the doors is even
across the front. While holding the door in place,
tighten the top hinge screws. Do not overtighten
these screws. Tighten them until they are just snug,
and then turn them another one-half turn.
3. Snap the left top hinge cover over the hinge.