LENCO SCD-650BU Mode D'emploi page 10

MP3 Disc or MP3 USB mode
During playback press the PLAY MODE button once, the display shows "REP". The current track will be
played repeatedly.
When pressing the PLAY MODE button a second time, the display shows "REP ALBUM". All tracks in the
current folder will be played repeatedly.
When pressing the PLAY MODE button a third time, the display shows "REP ALL". All tracks will be
played repeatedly.
When pressing the PLAY MODE button a fourth time, the display shows "RAND". All tracks will be played
in random sequence.
When pressing the PLAY MODE button a fifth time, the unit will resume to normal playback.
Note:
For MP3 playback, there is a limitation of 99 folders with a maximum of 999 files the unit could
-
support.
Programmed Playback
This unit can be programmed to play any sequence of up to 20 tracks.
1. In stop mode press the PLAY MODE button. "P01" is shown.
2. Press the ALBUM button to select correct folder (available for MP3 tracks only).
3. Press the NEXT or PREVIOUS button to select the desired track.
4. Press the PLAY MODE button to save the desired track.
5. Repeat steps 2-4 to program up to 20 tracks on a CD (99 tracks in MP3)
6. Press the PLAY/PAUSE button to play according to the programmed track.
7. To clear program play press the STOP button twice or change to another mode.
8. During program play you can also do the "Repeat One" or "Repeat All" operation. But during program
play, random play is not supported.
7. MICROPHONE IN (KARAOKE)
The unit provides a feature of mixing the microphone input to the played sound. The MIC In jack is
located at the unit front panel.
1. Plug in the microphone into the MIC In jack.
2. Adjust the microphone volume by tuning the MIC VOLUME CONTROL located at the front panel.
Note:
At no Microphone connected, it is better to adjust the microphone volume to minimum.
-
10