Siemens GS36NVIEP Notice D'utilisation page 34

en
Ice maker
Fig. (
Use only drinking water to make ice
cubes.
1. Take out water container and fill with
drinking water up to the mark.
Note
If too much drinking water is added,
the function of the ice maker may be
impaired. The ice cubes cannot
be removed individually from the ice
tray. Too much drinking water was
added and is running into the storage
container, causing any ice cubes
to freeze together.
2. Pour drinking water into the filler
opening.
3. Re-insert water container.
4. When the ice cubes are frozen, press
lever down and release.
The ice cubes loosen and fall into
the storage container.
5. Pull out storage container and remove
ice cubes.
Freezer calendar
To prevent the quality of the frozen food
from deteriorating, do not exceed the
storage duration.The storage period
depends on the type of produce.
The figures next to the symbols indicate
the permitted storage period
of the produce in months. In the case
of commercially available frozen food
observe the date of manufacture or use-
by date.
34
Ice pack
The ice pack can be removed to cool
food temporarily, e.g. in a cold bag.
If a power failure or malfunction occurs,
the ice pack can be used to slow down
the thawing process.
To save space, the ice pack can be
stored in the door compartment.
Ice cube tray
Fig. )
1. Fill the ice cube tray ¾ full of drinking
water and place in the freezer
compartment.
2. If the ice tray is stuck to the freezer
compartment, loosen with a blunt
implement only (spoon-handle).
3. To loosen the ice cubes, twist the ice
tray slightly or hold briefly under
flowing water.
Switching off and
disconnecting the
appliance
Turn off appliance
Fig. "
Press the On/Off button 1.
Temperature display 2 goes out,
refrigeration unit switches off.
Disconnecting the appliance
If you do not use the appliance
for a prolonged period:
1. Switch off the appliance.
2. Pull out mains plug or switch off fuse.
3. Clean the appliance.
4. Leave the appliance door open.