Siemens GS36NVIEP Notice D'utilisation page 29

3
Display super freezing
Illuminates when super freezing is
on.
4
Temperature selection button
The required temperature is set
with this button.
Switching the
appliance on
Fig. "
Switch on the appliance with the On/Off
button 1.
A warning signal sounds. Temperature
display 2 is flashing.
Press the temperature setting button 4.
The warning signal switches off.
When the freezer compartment has
reached the set temperature, the
temperature display 2 is lit.
We recommend a factory setting
of -18 °C in the freezer compartment.
Operating tips
After the appliance has been switched
■
on, it may take several hours until
the set temperature has been
reached. Do not put any food
in the appliance beforehand.
The fully automatic NoFrost system
■
ensures that the freezer compartment
remains free of ice. Defrosting is not
required.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area
of the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until
the resulting low pressure has
equalised.
Setting
the temperature
Fig. "
Freezer
The temperature can be set
from -16 °C to -26 °C.
Keep pressing temperature setting
button 4 until the required freezer
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 2.
Alarm functions
Fig. "
Door alarm
A warning signal is switched on if the
appliance door is left open for a while.
Close the door to switch off the warning
signal.
en
29