Publicité
Les langues disponibles
Les langues disponibles
(ZWIFT, KINOMAP,...).
Open the App to run it. When
prompted by the App, select the
appropriate BH Module from the list
displayed on the Android device to
pair.
See compatible apps on the web:
www.bhfitness.com
Get
your
free
activation code at:
http://colectivos.bhonlinestore.
com/bh-by-kinomap/
EMERGENCY STOP.-
For the user's maximum safety, this
unit is equipped with a safety key (g)
and a STOP button. The safety key (g)
must be slotted into its housing (E),
Fig.2, otherwise the machine will not
start.
When you are using the machine
always clip the cord on the safety key
to your clothing. Tugging on the cord
will pull the safety key out of its slot
and the machine will stop immediately.
To restart the machine simply put the
key back into the key slot.
Remove the safety key (g) whenever
the machine is not being used and
keep it out of children's reach.
Pressing the red button marked STOP
will also stop the unit immediately.
To restart it, press the button marked
START again.
BH
by
Kinomap
PULSE MEASUREMENT.-
Your pulse rate is measured by
placing both hands on pulse sensors
(R) with which the electronic unitis
equipped. The pulse rate readout will
appear after a few seconds.
IMPORTANT: This is not a medical
appliance and therefore the heart rate
shown
is
purposes.
NOTE: Adjusting the volume to high
levels may cause interference with the
pulse signal. If this happens, decrease
the volume.
LUBRICATION
FUNCTION.-
This machine has a built-in lubrication
warning. After running a distance of
300 km, the monitor will display OIL.
This means that your machine needs
lubrication.
indicated in the LUBRICATION section
and then press any key for 6 seconds.
This will clear the warning and reset
the distance until the next lubrication.
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE.
11
merely
for
Lubricate
the
guideline
REMIND
belt
as
Publicité
