KitchenAid Sculptura KUDS24SE Guide D'utilisation Et D'entretien page 28

CAUSE
Improper loading
PROBLEM
Chipping of
dishes
Black or gray Aluminum items
marks on touching dishes
dishes
SOLUTION
Removing spots and film
Keep the rinse agent dispenser filled with a
liquid rinse agent. A rinse agent prevents
water from forming droplets and drying as
spots or streaks.
To remove spots and film on dishes and
glasses, or hard water film/lime buildup on
the interior of the dishwasher, you may use
white vinegar with the following procedure:
1. Load clean dishes and glasses in the
dishwasher in regular manner. Do not load
silverware or other metals in the dishwasher.
2. Put 2 cups of household vinegar in a glass
or dishwasher-safe measuring cup, and
stand it upright in the bottom rack.
3. Close the door.
4. Select the Normal cycle and Energy Saver
Dry option, then press Start. Do not use
detergent. Allow the dishwasher to com-
plete the entire cycle.
NOTE: This procedure is intended for occa-
sional use only. Vinegar is an acid and
excessive use may damage your dishwasher.