Publicité
TROUBLESHOOTING
Graphic equalizer
Graphic equalizer settings can't
be changed.
© Deck is recording.
Turntable
Platter does not run.
© Belt is off.
* Input selector not set to PHONO.
© Dust on record.
¢ Scratch on record.
* Tonearm lead-in position needs adjustment.
¢ Record size is not standard.
No sound.
Noise or scratchy sounds.
Tonearm stylus does not start
playing at correct position.
(PL-Z570 only)
¢ Graphic equalizer operation isn't possible during
recording. Use it before recording.
* Graphic equalizer has no effect when the direct
mode is on.
® Put belt correctly on platter.
¢ Set input selector to PHONO.
¢ Clean record.
¢ Use good record.
¢ Refer to page 110. Adjust position.
¢ Use different record or MANUAL PLAY.
114
<ARE1180>
En
—
Publicité
