Publicité
Les langues disponibles
Les langues disponibles
Fig. 20
Pre-filter
Fig. 21
Inlet filter
2. Clean the nozzle with the needle clean out tool provided
(Fig. 22). Remove the spray wand from the gun; remove any
dirt from the nozzle hole and rinse.
Fig. 22
3. Remove additional debris by back flushing water through
the nozzle and spray wand. To do this, place the end of your
garden hose (with water running) to the tip of the nozzle,
pushing water and debris out of the back opening of the
nozzle and spray wand.
!
Needle clean out tool
Circuit Diagram
A circuit diagram for the pressure washer is provided below for
your reference (Fig. 23).
Fig. 23
Micro-switch
Motor
Capacitor
Disposal
Recycling the washer
• Do not dispose of electrical appliances as unsorted
municipal waste. Use separate collection facilities.
• Contact your local government agency for information
regarding the collection systems available.
• If electrical appliances are disposed of in landfills or dumps,
hazardous substances can leak into the groundwater and
get into the food chain, damaging your health and well-
being.
• When replacing old appliances with new ones, the retailer
is legally obligated to take back your old appliance for
disposal at least free of charge.
Service + Support
If your Sun Joe
SPX3001 electric pressure washer requires
®
service or maintenance, please call the Snow Joe
Sun Joe
®
customer service center at 1-866-225-9723.
Model + Serial Numbers
When contacting the company, reordering parts, or arranging
service from an authorized dealer, you will need to provide the
model and serial numbers, which can be found on the decal
located on the housing of the unit. Copy these numbers into the
space provided below.
Record the following numbers from the housing or handle of your
new product:
S
P X 3
0 0 1
14
On/off switch
®
+
Model #:
Serial #:
Power cord
Publicité
