Homak HS10036683 Manuel Du Propriétaire page 7

9-VOLT BATTERY BACKUP
On the front of the safe you will fi nd positive (+) and negavitve (-)
terminals located at the end of the keypad. These terminals are able to
be connected to a 9-Volt Battery in order to provide power to your safe
when battery power is low or lost.
*NOTE: 9-Volt battery backup may only work when internal
batteries are completely drained.
Please note that once battery power is low or lost, the code will
default back to the manufacturer's code found on the back
of this manual.
1. Match the positive and negative terminals with those on the 9-volt
battery. (It is recommended to use a set of alligator clips between
the terminals and the 9-volt battery to insure a secure and
constant connection).
2. Press fi rmly, making sure that the metal prongs beneath the rubber
keys are touching the metal terminals on the battery.
3. Enter manufactuer's code. Lights will fl ash green upon each
correct entry.
4. After entering entire code, press on the upper let hand corner of the
door while the light is solid green.
MAINTENANCE
Powder Coat Finish
For heavy build-up of dirt and grime, our powder coat paint fi nish can be
cleaned with spray wax. Lightly spray the wax on the surface, and gently
wipe with a soft, dry microfi ber cloth.
Window cleaner and a soft cloth dampened with water can be used to
clean the fi nish on a regular basis.
Customer Satisfaction
All mechanical parts are inspected and adjusted for proper use before
shipment; however, mechanisms may shift during transit. Should any of
these items not operate correctly, please call customer assistance
at 1-800-874-6625.
PRODUCT MADE IN CHINA
- 5 -