Vinotemp EL-54SDTH Manuel Du Propriétaire page 10

OPERATING YOUR WINE COOLER
The controls of your wine cooler
POWER
To control this appliance, turn on/off. To turn OFF the appliance, touch the
LIGHT
To control the interior light, turn on/off.
PLUS
Press to raise (warm) the set temperature by 1°C or 1°F.
MINUS
Press to lower (cool) the set temperature by 1°C or 1°F.
°F/°C Selector
Select the temperature display setting in Fahrenheit or Celsius degree.
To change the temperature from Fahrenheit to Celsius or from Celsius to Fahrenheit, touch and hold
mark for 5 seconds.
SETTING A TEMPERATURE
The interior control temperature range is
•
• The temperature will increase by 1°C or 1°F if you touch PLUS [+] once, or the temperature will
decrease by 1°C or 1°F if you touch MINUS [-] once.
To view the set temperature at any time, touch PLUS [+] or MINUS [-] and the set temperature will
•
temporarily flash in the LED display for 5 seconds. It will then go back to the case interior temperature.
NOTE: When using the unit for the first time or after a long period of inactivity, there may be a variance of a few degrees
between the selected temperature and the temperature indicated on the LED readout. This is normal due to the length of
inactivity, and will correct itself after the unit is run for a few hours. If the unit is unplugged, has lost power or is turned off,
wait 3 to 5 minutes before restarting the unit. The unit will not restart before this time delay.
10
40°F (5°C) - 72°F (22°C).
key for 5 seconds.