Télécharger Imprimer la page

Makita DCU602 Manuel D'instructions page 18

Carretilla propulsada a batería

Publicité

Les langues disponibles

Les langues disponibles

Forward/reverse and speed button
2
1
3
Fig.20
► 1. Forward/reverse button 2. Speed indicator
3. Speed button
Press the forward/reverse button to switch between the
forward mode and reverse mode. Press the speed but-
ton to switch between low speed, medium speed, and
high speed. When the power is turned on, the forward
mode and low speed are set.
NOTE: The forward/reverse button is not available
while pulling the switch trigger.
NOTE: A short beep sound comes out when operat-
ing the machine in reverse.
NOTE: The speed button is not available when oper-
ating the machine in reverse.
NOTE: If the machine detects a problem, the speed
indicators blink alternately. In this case, refer to the
section for troubleshooting.
Beep button
When you press the beep button, the beep sound is
emitted.
Fig.21
► 1. Beep button
NOTE: The beep button is available when the
machine is turned on.
NOTE: The beep button is available even if the lock
key is not inserted in the battery box.
Lighting up the lamps
Press the lamp button on the battery box to light up the
front lamps and rear lamp. To turn off the lamps, press
the lamp button again.
Fig.22
► 1. Lamp button 2. Front lamp
1
Fig.23
► 1. Rear lamp
NOTE: The lamps go off if the machine is not oper-
ated for a certain period.
NOTE: The lamps go off when the power is turned off.
NOTE: You can light up the lamps even if the lock key
is not inserted.
18 ENGLISH
1
1
2

Publicité

loading