ohmex VCL 6080 MOP Manuel D'utilisation page 44

EN
USE AS ELECTRIC BROOM
- Remove the appliance from the base (9).
- Place one foot on the brush (11) and hold the handle (1).
Pull the latter towards yourself to adjust inclination as desired.
- Press the ON/OFF switch (2) to start the motor.
- Press a second time to turn off the motor.
CLEANING AND MAINTENANCE
ALWAYS disconnect the power
plug from the socket before
performing maintenance and/
or cleaning operations.
• For the appliance external parts cleaning use a damp cloth avoiding using abrasive
detergents.
Never submerge the motor body (4) in water or other liquids.
Never wash the motor body (4) using a water jet.
• The appliance aspiration capacity depends on the air filtering systems conditions too.
Clean the container (6) after every use. Clean the filters regularly.
Cleaning the container (6) and the filters (12 and 13)
• Place yourself on a rubbish collector.
• Press the button (6a) to release the container cover (6) (Fig.F6)
• Empty the container (6). (Fig.F6)
• Remove the container (6) by turning it anticlockwise (Fig.F7).
• Remove the filter (13) complete with the filter (12) (Fig.F8).
• Extract the filter (13) from the filter (12) (Fig.F8).
• Tap the filters in a waste container (bin, etc.).
If necessary, blow them with air, being careful not to damage them.
• Clean the filters (12 and 13) with a soft brush.
• Re-assemble the filters (12 and 13) and the container (6) correctly.
• Place the container on the motor body (4) by turning it clockwise.
38
VCL 6080 MOP