Publicité
Power supply
The power supply of the BURY CP 1000 CarPhone is established via a 4-core cable. Connect the black (clamp
31 – minus), the red (clamp 30 – steady plus) and the blue cable (clamp 15 – ignition plus) to the power supply
of your radio (where required via the cigarette lighter or the fuse box). After connection to the counterpart, the
yellow cable provides for radio muting during a phone conversation. Please connect the white Molex connector
with connection 1.
Attention:
X Do not connect your device to the power supply or switch it on
until instructed to do so in the installation instructions.
Attention:
X If you also connect the blue cable to clamp 30 (steady posi-
tive), the BURY CP 1000 CarPhone will be permanently supplied
with power. If the vehicle is not running for a longer period, this
could lead to a discharge of the car battery.
X If you deviate from the specified connection descriptions it
may be the case that certain functions on the BURY CP 1000
CarPhone (e.g. the on-call duty) will not function correctly.
13
Publicité
