Bosch GLF 18V-8 Professional Notice Originale page 16

16 | English
(6) Cap nut with collet
(7) Collet
(8) Spindle lock button
(9) Guide plate
(10) Base plate
(11) Dust extraction adapter
(12) Wing bolt for routing base
(13) On/off switch
a)
(14) Rechargeable battery
a)
(15) Battery release button
(16) Speed preselection thumbwheel
(17) Handle (insulated gripping surface)
(18) Worklight
(19) Scale for setting the routing depth
(20) Tool holder
(21) Open-ended spanner (13 mm, 17 mm)
a)
(22) Guide bushing
(23) Parallel guide
(24) Wing bolt for parallel guide
a)
(25) Guide
(26) Wing bolt for fixing the horizontal alignment
(27) Wing bolt for horizontal alignment of the guide
a)
(28) Guide roller
a)
(29) Dust extraction adapter
a)
(30) Extraction hose
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Edge router
Article number
Rated voltage
A)
Rated no-load speed
Speed preselection
Constant electronic control
Connection for dust extraction
Compatible collets
B)
Weight
Recommended ambient tem-
perature during charging
Permitted ambient temperature
C)
during operation and during
storage
Recommended rechargeable
batteries
1 609 92A 9DR | (06.05.2024)
Edge router
Recommended battery chargers
A) Measured at 20–25 °C with rechargeable battery ProCORE18V
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C
Values can vary depending on the product, scope of application and
environmental conditions. To find out more, visit
www.bosch-professional.com/wac.
Noise/Vibration Information
Noise emission values determined according
to EN 62841-2-17.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 81 dB(A); sound power
level 89 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 62841-2-17: a
K = 1.5 m/s
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
a)
pare power tools. They may also be used for a preliminary
a)
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ac-
cessories or is poorly maintained, the vibration level and
noise emission value may differ. This may significantly in-
crease the vibration and noise emissions over the total work-
ing period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
GLF 18V-8
not actually being used should also be taken into account.
3 601 FC6 0..
This may significantly reduce vibration and noise emissions
over the total working period.
V 18
Implement additional safety measures to protect the oper-
–1
min 10000–30000
ator from the effects of vibration, such as servicing the
●
power tool and accessories, keeping their hands warm, and
●
organising workflows correctly.
●
Rechargeable battery
mm 6/8
inches 1/4"
Bosch sells some cordless power tools without a re-
kg 1.5–2.5
chargeable battery. You can tell whether a rechargeable bat-
tery is included with the power tool by looking at the pack-
°C 0 to +35
aging.
°C –20 ... +50
Charging the battery
u
GBA 18V...
ProCORE18V...
Note: Lithium-ion rechargeable batteries are supplied par-
tially charged according to international transport regula-
4.0Ah
(triax vector sum) and uncertainty K
h
2
.
Use only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
GLF 18V-8
GAL 18...
GAX 18...
GAL 36...
2
= 1.0 m/s ,
h
Bosch Power Tools