Beurer FB 65 Mode D'emploi page 17

At the end of use
To switch the foot bath o again before the automatic switch-o takes e ect (see "Timer function"), press
the ON/OFF button
Switch the foot bath o after use and remove the mains plug from the socket.
Pedicure attachments
The foot bath has a motorised pedicure centre
There are three di erent attachments
• The portable pedicure device attachment
• The brush attachment
• The massage attachment
We recommend attaching the pedicure attachments when the foot bath is in standby mode.
Setting the water temperature
You can use the foot bath with and without water heating. The water heating can be set to between
34°C and 48°C. The water heating starts at 34°C. You can increase/decrease the water temperature in
2°C increments.
1. To switch the water heating on, press the "Increase water temperature" / "Switch on water heating" func-
tion button .
13
2. To increase the water temperature in the foot bath, press the "Increase water temperature" / "Switch on
water heating" function button
3. Select your desired water temperature using the "Water temperature / Water heating" function buttons
. The desired water temperature is shown briefly on the display
14
ing the current water temperature.
4. The heating process starts.
• The foot bath has a memory function that remembers the set water temperature until the
power circuit is interrupted.
• For quicker heating, we recommend activating the "Bubble" function as well.
• Di erent water temperatures have a positive e ect on the feeling in your body. Choose the
right water temperature for your wellness experience:
- Cold water (24–29°C – without water heating) has a refreshing and vitalising e ect on
the body. It awakens your spirits and brings new energy.
- Lukewarm water (30–40°C) supports an optimal wellness experience and has a nurtur-
ing and constructive e ect.
- Warm water (approx. 42–48°C) has a particularly soothing and warming e ect on the
body and, as a result, can support the immune system. Please note that the water tem-
perature should increase slowly and should not be set too high initially.
5. To reduce the water temperature in the foot bath, press the "Decrease water temperature" / "Switch o
water heating" function button
6. The water heating has been switched o when the LEDs of the "Water temperature / water heating" func-
tion buttons
13 14
Vibration massage
You can switch a vibration massage on during use.
1. To switch the vibration massage on, press the "Vibration" function button
starts to light up.
15
2. To switch the vibration massage o again, press function button
again. The ON/OFF button
12
9 10 11
can be used to stimulate the reflex zones in the soles of your feet.
10
provides a pleasant massage for your feet and stimulates circulation.
11
.
13
.
14
turn o .
flashes again. The foot bath is in standby mode.
12
for individual pedicure.
8
that you can attach to the motorised pedicure centre
can be used to remove dead skin cells and calluses.
9
17
before the display returns to show-
19
. The LED of function button
15
again. The LED turns o .
15
:
8
13