Eaton Protection Station 500 DIN Manuel D'installation Et D'utilisation page 29

Technical characteristics
UPS power
◗
Nominal input voltage
◗
Input frequency
◗
Voltage/frequency of battery backup
◗
outlets 6 in battery mode
Total output current for the 6 outlets
◗
Output current of battery backup outlets 6
◗
Leakage current
◗
Input protection
◗
Transfer time
◗
Telephone surge protection
◗
Sealed lead-acid battery
◗
Automatic battery test
◗
Average battery life 1
◗
Operating temperature
◗
Storage temperature
◗
Operating relative humidity
◗
Operating elevation
◗
Safety standards
◗
Electromagnetic compatibility standards
◗
Warranty
◗
(1) Warning: To save battery life, it is not recommended to use the Protection Station in side position .
(2) Warning: This is a class A-UPS product. In a domestic environment, this product may cause radio interference, in
which case, the user may be required to take additional measures.
www.eaton.com
MAU-00044-AD
Protection Station 500
500 VA / 250 W
184 V - 264 V
50/60 Hz
230 V (50/60 Hz ± 1 Hz)
with pseudosinusoidal wave
5 A max
2.2 A max
0.03 mA
5 A resettable circuit breaker
5 ms typical
Tel, ISDN, ADSL, Ethernet
12 V, 4.5 Ah
Once a week
4 years typical, depending on number
of discharge cycles and temperature
0 to 35°C
-25°C to +55°C
0 to 85%
0 to 2000 m
IEC 60950-1, IEC 62040-1-1, CE certified
IEC 62040-2 2
2 years