Secure Air SBA Manuel D'utilisation Et D'entretien page 20

16 Maintenance
ATTENTION
Read carefully section 2 before doing any maintenance
ATTENTION
All maintenance and repair works should be done by a professional who has read and
understood the manual of use and maintenance.
16.1 Collection drawer
With the machine off, open the collection drawers and empty them. The frequency of cleaning is determined by
the amount of slag produced. In any case it is advisable to empty it daily.
17 Disassembly
17.1 Authorized personnel
Assembly and disassembly can be done only by skilled personnel, trained and authorized knowing all the
procedures described in this manual. All the mentioned operations must be performed at least by two people.
17.2 Disassembly
Follow the instruction here below for a correct disassembly of the unit:
 Unplug the machine from the power line;
 Empty the collection drawer;
 Disconnect the machine from the exhaust line;
 Remove / disconnect any other element connected to the filter but not belonging to it.
18 Research and deleting defects of the plant
Not being equipped with filtered elements and suction elements, the defects that may be encountered during the
operation of the bench are to be found in the suction unit / filter.
19 Spare parts
Contact the company providing plate data
20 Waste disposal
For disposal of used filters, please contact the relevant organs or specialized companies.
Pagina 20 di 31