Secure Air SBA Manuel D'utilisation Et D'entretien page 13

1. Introduction
1.1 Aim of this manual
The "use and maintenance manual" describes all necessary steps for the correct installation and use of the machine
with great care to safety and environmental protection.
This manual should be read carefully before starting up the machine and kept close to machine for the user or the
maintenance staff.
The machine was designed and built in compliance with the standard safety of industry. As confirmation of this, the
machine has been applied the "CE" that ensures compliance with the Machinery Directive.
Any work of tampering on the device, which is not authorized, and / or any work performed by unskilled personnel
could undermine the good operation of machine and could also alter performances.
For any further information not included in this manual you can contact:
Via Stroppiana, 15 - 10071 Borgaro Torinese, Turin, Italy - Ph. +39 011 4502031 - Fax. +39 011 4703927
- The information contained in this manual are property of GAMMA IMPIANTI SRL.
- Reproduction is forbidden, without prior written authorization of GAMMA IMPIANTI SRL.
- GAMMA IMPIANTI SRL takes no responsibility for any errors that may appear in this document and reserves the
right to change, without notice, the features of products of this manual.
- GAMMA IMPIANTI SRL declines all responsibility for any damage suffered by third parties as a result of improper
installation, misuse, removing or disabling of safety devices installed.
- In any case the company GAMMA IMPIANTI SRL declines all liability for accidents or damage to the machine and
its components, described in this document, if caused or resulted from an incorrect information use contained in
this manual.
1.2 Definition
In this manual you will find the following terms ATTENTION, WARNING, NOTE to give emphasis to some
instruction or information considered critical or unusual.
ATTENTION
INFORMATION OR PROCEDURE THAT IF NOT STRICTLY PERFORMED CAN CAUSE
INJURING OR DEATH OF PEOPLE
WARNING
INFORMATION OR PROCEDURE THAT IF NOT STRICLTY PERFORMED CAN CAUSE SERIUS
DAMAGES TO THE UNIT OR ITS COMPONENTS
Note
Information or procedure able to make easier or simplify maintenance operations, or part of text
to be highlighted.
1.3 Privacy
All technical information contained in this manual are a property of GAMMA IMPIANTI SRL and have to be
considered of confidential nature: any disclosure or any copy are forbidden, without a written approval of
GAMMA IMPIANTI SRL.
Pagina 13 di 31
GAMMA IMPIANTI SRL
email: info@secureair.it – website:
Figure 1- Definition
www.secureair.it