Publicité
Les langues disponibles
Les langues disponibles
ATTENTION:
ANY OTHER OPERATION OR WORK NEAR THE EXHAUST HOODS IS FORBIDDEN
BECAUSE IT MAY CAUSE DAMAGE OR FIRE.
11 Packing
The machine is supplied mounted.
12 Transport and handling
During the transport:
- Do not place material on the packed machine;
- Do not expose the machine to atmospheric agents;
- For the handling use the space under base of the bench;
ATTENTION:
FOR HANDLING THE COLLECTOR USE PROPER TOOLS AS CURRENT REGOLATION
13 Installation and start-up
13.1
Positioning
Do not expose the machine to weathering, especially during use and / or storage in the warehouse. Use the machine
in temperature (to the motor) between 0 ° C and + 40 ° C and in any case with a maximum relative humidity which
does not exceed 85%.
Switch on the machine only on land or paving horizontal. Do not place any tools and / or object on the machine. Do
not place the bench near machines or anything that can produce or produces sparks or flames or any other element
that can be a source of fire ignition.
The area location must be accessible to any cleaning, maintenance and repair, and must present levelled and still
be able to withstand a distributed load and concentrated suitable to the machine installed.
The machine cannot be placed in ATEX classified location.
13.2 Assembly
The machine is supplied assembled. Consult the manual of the aspirator / filter.
14 Preparation for use
Preparation for use of the purifier essentially consists in connecting the suction line to the suction bench
15 Utilization
ATTENTION
CAREFULLY CHECK THE SUCTION POINTS CONNECTED TO THE MACHINE ARE OPEN,
FREE FROM FOREIGN BODIES AND IMPOSSIBLE TO VACUUM EVERYTHING NOT
CONTAINED IN CHAP. 6 "INTENDED USE"
IMPROPER USE CAN CAUSE DAMAGE TO THE PURIFIER, AND ALSO LEADS TO THE
INSTANTANEOUS TERMINATION OF THE WARRANTY.
Press the power switch.
After processing, press the off switch.
Pagina 19 di 31
Publicité
