Russell Hobbs RHMA20L Mode D'emploi page 13

CLEANING AND MAINTENANCE
•
This appliance is for household use only and is not user-serviceable.
•
Do not open or change any parts by yourself. Please refer to a qualified electrical
service department or return to the supplier if servicing is necessary.
•
Turn off the oven and remove the power plug from the wall socket before
cleaning.
•
Keep the inside of the oven clean. When food splatters or spilled liquids adhere
to oven walls, wipe with a damp cloth. Mild detergent may be used if the oven
gets very dirty. Avoid the use of spray and other harsh cleaners as they may stain,
streak or dull the door surface.
•
The outside surfaces should be cleaned with a damp cloth. To prevent damage to
the operating parts inside the oven, water should not be allowed to seep into the
ventilation openings.
•
Wipe the door and window on both sides, the door seals and adjacent parts
frequently with a damp cloth to remove any spills or spatters. Do not use
abrasive cleaner.
•
Do not allow the control panel to become wet. Clean with a soft, damp cloth.
When cleaning the control panel, leave oven door open to prevent oven from
accidentally turning on.
•
If steam accumulates inside or around the outside of the oven door, wipe with a
soft cloth. This may occur when the microwave oven is operated under high
humidity condition. And it is normal.
•
It is occasionally necessary to remove the glass tray for cleaning. Wash the tray
in warm sudsy water or in a dishwasher.
•
The roller ring and oven floor should be cleaned regularly to avoid excessive
noise. Simply wipe the bottom surface of the oven with mild detergent. The roller
ring may be washed in mild sudsy water or dishwasher. When removing the roller
ring from cavity floor for cleaning, be sure to replace in the proper position.
EN-13