Publicité
Les langues disponibles
Les langues disponibles
Playing CDs
Locating a Specific Track or a
Point in a Track
You can quickly locate any track while playing a disc
by using the ≠ AMS ± (AMS: Automatic Music
Sensor) dial or by using the =/+ buttons on the
remote. You can also locate a specific point in a track
while playing a disc.
I / u
Number
buttons
>10
=/+
0/)
GB
16
≠ AMS ±
+100
To locate
You need to
Turn the ≠ AMS ± dial
the next or
succeeding tracks
clockwise until you find the track
Turn the ≠ AMS ± dial
the current or
preceding tracks
counterclockwise until you find the
track
a specific track
Press the number button of the track
directly Z
on the remote. When you directly
locate a track numbered over 10, press
>10 first, then the corresponding
number buttons.
Press 0 (backward)/) (forward)
a point in a track
on the remote and hold down until
while monitoring the
sound Z
you find the point
Press 0 (backward)/) (forward)
a point in a track
quickly by observing
on the remote and hold down until
the display Z
you find the point during pause. You
will not hear the sound during the
operation.
Note
If "– OVER –" appears in the display, the disc has reached the
end while you were pressing ). Turn the ≠ AMS ±
dial counterclockwise or press 0 to go back.
Publicité
