Connection - ETNA AG160WIT Mode D'emploi

INSTALLATION

Connection

Electric connection
The appliance has been manufactured as a class II, therefore no earth
cable is necessary.
Make sure the supply voltage ratings correspond with those stated on
the appliance data plate. The connection to the mains is carried out as
follows:
BROWN = phase L
BLUE = phase N
This canopy hood has been provided with a power plug.
When installing the hood, make sure that this plug remains accessible.
We recommend installing the wall socket out of view.
Attention:
If you want to make a fixed connection, ensure that a multi-pole
switch with a distance between contacts of 3 mm is installed in the
supply cable.
max. 80 cm
M
EN 11