Portamate PM7010 Manuel De L'utilisateur page 2

Quick-Mount Attachment Setup
Position- is the handle location shipped from
the factory. If your stand requires Position-C
follow these simple instructions to adjust.
1. Disconnect the bolt and
nut from Position-.
2. Insert the handle as
shown lined up with
Position-C. The handle
is spring loaded so you
will experience a little
resistance.
3. Insert bolt through
hole-C, the handle and
out the other side.
4. Attach the nylon nut
to the bolt and tighten
securely.
Stand Model Handle Position
PM4000
C
PM4400
C
PM5000
C
PM6300

PM6500

PM7000

PM8000

2