Frigidaire FFFU17M1QW Utilisation Et Entretien page 6

FIRST STEPS
3. Once the inside surface snaps in place,
continue the process by rolling the handle
clip slightly outward and pressing down
firmly to snap onto the outside surface. If
installed incorrectly, the handle clip will not
lay flat.
Door Removal
(upright models)
If door must be removed, unplug the unit.
1. Gently lay the unit on its back, on a rug
or blanket.
2. Remove 2 base screws and base panel.
3. Remove wire from clips on bottom of
cabinet if required.
4. Unplug connector, if required, by holding
the cabinet connector in place, and pulling
door connector out.
5. Remove bottom hinge screws.
6. Remove plastic top hinge cover.
7. Remove screws from top hinge.
8. Remove top hinge from cabinet.
9. Remove door and bottom hinge
from cabinet.
10. To replace door, reverse the above order
and securely tighten all screws to prevent
hinge slippage.
6
All manuals and user guides at all-guides.com
Lid Removal
See Instructions on hinge label. Unplug the unit.
Base
Panel
Hinge Screws
Door Connector
Clips
Cabinet Connector
(chest models)
Base Panel
Screws
Wire