emerio SEW-132300.1 Mode D'emploi page 9

machine will automatically start sewing. We recommend the low speed for beginners (Fig.13).
7. When you finish the sewing, turn off the switch, unplug the adapter, turn the hand wheel to raise the
needle all the way up, lift the presser foot, and then gently remove the fabric from the sewing machine,
and cut the thread with the thread cutter (Fig.14).
Tips:

Please turn the hand wheel if it is difficult to remove the fabric, and then pull out the fabric gently.

If the thread had tangled or jammed, please turn the hand wheel and simultaneously pull the thread
slightly to release the thread. Bottom bobbin mechanism is a more precise part, inappropriate actions
may damage it. Please to not push or pull it by finger or any tools.
FEATURES
1. Selection of stitch pattern
Rotate the pattern selection dial to select one pattern you want from the 12 stitch patterns. There are pattern
illustrations on the surface of machine body for your reference.
Caution:

Before you change the stitch pattern, please turn off the switch and turn the hand wheel to raise the
needle all the way up so it doesn't get stuck and bent.

Changing the stitch pattern is not allowed when the machine is running, otherwise the needle and/or
machine may damage.
2. Reverse sewing
Reverse sewing (back stitching) is useful for reinforcing the beginning and end of seams. To use this function
proceed as follows:
1) Sew forwards as normal, and then press and hold down the reverse stitch button on the front of the
sewing machine to sew backwards.
2) To sew forwards again simply release the reverse stitch button.
Note: Reverse sewing is applicable only to stitch patterns 1 to 4.
3. Setting the sewing speed
Slide the power switch to "L" or "H" position. ("L" = low speed; "H" = High speed)
Fig.11
Fig.13
- 8 -
Fig.12
Fig.14