Sony SU-46NX1 Mode D'emploi page 14

6
Attach the Neck Cover to the
Neck.
Align the Neck Cover with the Neck and slide it down
as shown in the illustration below. Secure the Neck
Cover and Neck with the Neck Cover Screw (PSW5 ×
16) black (supplied).
If you want to adjust the viewing angle of the TV,
adjust the angle before attaching the Neck Cover. Refer
to Step 2 of "Adjusting the viewing angle of the TV" on
page 7.
Neck Cover
Neck Cover
Screw
(PSW5 × 16)
black
7
Attach the Rear Cover to the TV
Stand.
6
(GB)
Neck
Rear Cover
Step 3:
Safety measures to
prevent toppling over
WARNING
Be sure to take measures to prevent the TV Stand from
toppling over, and causing possible injury and damage.
There is a hole to allow you to take measures to prevent
the TV Stand from toppling over, as shown in the
illustration below.
For details on the procedure, refer to the instruction
manual supplied with the TV.