Sony SU-46NX1 Mode D'emploi page 13

2
Install the TV onto the TV Stand.
The TV is installed by placing it in the groove of the
TV Stand.
For KDL-40NX80s/KDL-46NX80s/KDL-52NX80s
Attach the TV Support Pads to both sides of the TV Stand.
(The TV Support Pads have double-faced tape on the
downside.)
TV Support Pad
Arrow direction shows front of the TV Stand.
~
• Be careful not to pinch your fingers when installing the TV.
3
Secure the TV and the TV Stand
with the four TV Neck
Attachment Screws (PSW5 × 16)
black (supplied).
TV Neck Attachment Screw
(PSW5 × 16) black
4
Attach the Bottom Cover to the
TV set.
(KDL-40NX80s/KDL-46NX80s/
KDL-52NX80s only)
1 Before attaching the Bottom Cover, connect the AC
power cord.
For details on the procedure, refer to the instruction
manuals supplied with the TV.
2 When attaching the Bottom Cover, tilt the TV
forward, and then after attaching, tilt the TV back.
Bottom cover
5
Secure the TV and the TV Stand
with the Angle Adjustment Screw
(PSW5 × 10) silver (supplied).
Angle
Adjustment
Screw
(PSW5 × 10)
silver
(Continued)
5
(GB)