Publicité
Les langues disponibles
Les langues disponibles
Only for selected countries
In case of exhaust installation a window
switch might be required (consult an
authorised technician). You need to buy it
separately as it is not supplied with the
hob. The window switch has to be
installed by an authorised technician.
Refer to the installation booklet.
min.
500mm
If the appliance is installed above a drawer,
the hob ventilation can warm up the items
stored in the drawer during the cooking
process.
8
ENGLISH
Find the video tutorial "How to install your
AEG Extractor Hob" by typing out the full
name indicated in the graphic below.
min.
50mm
Filter housing assembly
Before the first use make sure to insert the
filter inside the housing with the black sides
facing inwards and the silver sides facing
outwards. Refer to "Cleaning the hood filter".
Once the filter housing is assembled, put it
inside the hood system and place the grid on
the hood.
3.4 Connection cable
• The hob is supplied with a connection
• To replace the damaged mains cable, use
• The single wire must have a diameter of
• Speak to your local Service Centre. The
How to install your AEG
Extractor Hob
cable.
the cable type H05V2V2-F which
withstands a temperature of 90 °C or
higher.
minimum 1,5 mm².
connection cable may only be replaced by
a qualified electrician.
WARNING!
All electrical connections must be made
by a qualified electrician.
www.youtube.com/electrolux
www.youtube.com/aeg
Publicité
