Zeiss Secacam 7 Manuel D'utilisation page 30

Note: The contacts of the memory card must face upwards.
Inserting the memory card: When you insert the memory card, the camera must be turned off! Open the
locking clip and open the camera. On the right side, you will find the memory card slot. Insert a SD/SDHC
memory card into the memory card slot until it clicks into place. When inserting
the memory card, the memory card contacts must face upwards, meaning you
must see the front of the camera and the golden contact strips of the memory
card.
Write protection switch: A small slider is located on the side of each memory
card to enable or disable the write protection. Before inserting the memory card
make sure that the slider is facing the card contacts. Only in this position can the
camera write data onto the memory card.
Formatting the memory card: We recommend formatting the memory card
before using it for the time. To format the memory card, activate the camera
display by switching the ON/SETUP/OFF switch to "SETUP". Then press the PLAY
button to enter the preview mode. After pressing the MENU button, you will be
given the "Format" or "Delete" options. Choose "Format" and press the "OK"
button. If you format the card on your PC, please select the exFAT file system.
30