Zeiss Secacam 7 Manuel D'utilisation page 27

EJECT (battery ejection): Pressing the EJECT button opens the battery compartment.
Infrared sensor: The passive infrared sensor (PIR) recognizes moving heat sources and triggers the camera.
The sensitivity of the sensor can be set in three levels via the menu.
Status indicator: Lights up red: Display switched on. Flashes red (up to 10 seconds): After it goes out, the
camera is ready to record.
Color LCD display: Setting the button to "SETUP" turns on the display. You can now check the capturing
area, view images or make menu settings after pressing the MENU button.
MENU button: When the display is switched on, the MENU button is used to call up the camera menu.
PLAY button: When the display is switched on, the PLAY button activates review mode.
Color LCD
display
ON/SETUP/OFF
switch
Navigation
buttons and
confirmation
(OK button)
MENU button
PLAY button
EJECT
(battery ejection)
Contact breaker
(pull out)
27