Continental Fireplaces BUILDER CB46 Manuel D'installation Et D'utilisation page 55

PINS
Place log #1 onto the A1 and A2 at the rear of the
fi rebox. Ensure the log sits fl at and does not cover the
pilot shield. Place 2 pins in the holes located at the
top of the log.
Place log #3 onto C1 and C2. Do not cover any
burner ports.
Place the right end of log #5 into the notch in log #3.
Allow the other end of log #5 to rest on the right-side
pin of log #1.
Place log #2 onto B1 and B2. Do not cover any
burner ports.
Place the left end of log #4 into the notch in log #2.
Allow the other end of log #4 to rest on the left-side
pin of log #1.
fi nishing
EN
55
W415-2369 / E / 02.28.22