Publicité
Les langues disponibles
Les langues disponibles
Using the dishwasher
Delayed start
When you select Delayed start, the dishwasher will start 1-24 hours after you have pressed
closed the door.
1. Press
once to activate Delayed start. Press several times, or hold it in, to set the desired
number of hours.
2. Press
and close the door. The timer counts down and the dishwasher starts after the selected
delay.
If you want to cancel the Delayed start option, open the door then press and hold
seconds.
Start/Stop
Press
until the display shows "Program started, close door". This indicates that the dishwasher
is ready to start. Close the door properly, otherwise the dishwasher will not start.
If the dishwasher is not started or the door is not closed within 2 minutes of the last time the control
panel was pressed, the machine switches off.
Stopping or changing a program
If you want to change program after starting the dishwasher, open the door then press and hold
for three seconds. Add more detergent if the lid of the detergent dispenser has opened. Then select
a new program, press
Remaining time
Once you have selected a program, program mode and options, the time the program took when
last used is displayed.
Status light
The status light at the bottom on the dishwasher provides information by means of 3 different colours.
Blue - Load more
The program has started, but you can still load more dishes.
Red - Do not load
You should not load more dishes (risk of poorer dishwashing result).
Green - Unload
The dishwashing program is finished. The status light stays on for 15 minutes.
18
and close the door.
Status light
and
for three
Publicité
