Oki CX2032 Guide De Référence Pratique page 12

Walk-up Operation
Copy
For more information, check with
your System Administrator or see the
on-line User's Guide provided with
your system.
Important
The system default is the Copy mode
and the C key is illuminated. If it is
OPY
not, press the C
OPY
Using the Default Settings
1. Load the document (see page 11).
2. Press the Mono key or the C
key.
Using Special Settings
1. Load the document (see page 11).
2. Use the numeric keypad to set the
number of copies (up to 99).
3. Press the A
DDITIONAL
4. Change the Copy settings* on the
display using the Up, Down, Left
and Right Arrow keys and the OK
key.
5. Press the M
ONO
key.
key.
OLOR
S key.
ETTINGS
key or the C
OLOR
12
*Copy Settings
The default setting is in bold italic.
Quality
Density
Collate
Duplex
N-up
Edge Erase
Margin Shift
(R)
Margin Shift
(B)
Paper Supply Legal, Letter, A4, A5.
Input Tray
English
•
Speed, Text, Photo.
Set the print mode which
provides the best results.
E.g., if the document has
many pictures, change
this setting to Photo.
-2, -1, 0, 1, 2
Set the print density
higher or lower.
OFF, ON
OFF, Short Edge, Long
Edge (see page 18).
(appears only when the
optional duplex unit is
installed)
1in1, 4in1 (Horizontal),
4in1 Vertical).
Set for multiple images
on one page.
0, 6, 13, 19, 25 mm.
Set amount of document
perimeter to be erased.
0, 6, 13, 19, 25 mm.
Set the document image
to shift left or right.
0, 6, 13, 19, 25 mm.
Set the document image
to shift up or down.
Auto, Tray 1, Tray 2
(appears only if the
optional second tray is
installed), MPT