Parkside 346230 2004 Instructions D'utilisation Et Consignes De Sécurité page 26

Please note:
T he surface of the target object must be significantly larger than the measuring
diameter of the product. Otherwise the measurement will not be reliable.
A lways measure at the closest possible distance to the measuring surface.
A im the product as vertical to the measuring surface as possible.
D o not measure in dusty, steaming or smoky atmospheres.
D o not measure through transparent materials such as glass or plastic.
Show temperature deviation
The temperature deviation is the difference between a previously established refer-
ence value and a temperature measurement. The display
as numeric values and displayed in colour. An acoustic signal also sound.
Determine reference value
P ress the measure button
the area of which you wish to use the temperature as the reference. The tem-
perature is indicated in the display
W hilst holding the Measure button, press the °C / °F / SET button
the temperature value as the reference value. This temperature is indicated in
the display next to „REF" as the reference display
Select tolerance range
You can set the temperature deviation from the reference value as of which the
product will respond with a visual and acoustic signal.
T o do so, whilst the reference value
button or the
10
the right ( ) or to the left ( ) above the tolerance range
display.
26 GB/IE
and aim the laser pointer with 8 dot circle
3
.
5
appears in the display
6
button . Using this button the
12
indicates the deviations
5
11
.
6
, press the
5
symbol will move to
selection in the
9
at
1
to use