SilverCrest SASL 12 A1 Mode D'emploi page 15

Handling and operation
Initial use
IMPORTANT
► It is possible that oil drops may cause damage to furniture
surfaces. If necessary, place a cloth under the appliance.
♦ Place the appliance on a stable and level surface.
♦ Place the salt crystal z onto the mounting 9 so that the line
on the bottom of the salt crystal points to the
base 8. Turn the salt crystal z clockwise slightly until the line
points to the
♦ Remove the attachment 1 from the base 8.
♦ Fill the water tank 3 with a maximum of 100 ml of clean tap
water using the measuring cup t provided. Note the maximum
filling level w, which is marked by a border.
♦ Add 2–4 drops of the desired oil to the water.
♦ Afterwards, place the attachment 1 back on the water tank 3.
♦ Connect the mains adapter r to the power socket.
Switching the appliance on/off and setting
the lighting
♦ Press the
mist production starts and the lighting is switched on.
♦ Press the
or to switch off the lighting.
♦ If the appliance is switched on, press the
it off immediately. Aromatic mist production and the lighting will
be switched off.
│ GB │ IE
■ 12
symbol.
button 7 to switch on the appliance. The aromatic
button 6 repeatedly to select the desired brightness
symbol on the
button 7 to switch
SASL 12 A1