SilverCrest SBMS D30 B1 Instructions D'utilisation Et Consignes De Sécurité page 40

Any obstacle between this product and a
Bluetooth device can reduce the operational
range.
If the signal strength is too weak, the
connection between your Bluetooth playback
device and the product can be disconnected.
The product will then automatically switch
back to pairing mode.
Press the button 7 or the
BT (Bluetooth) button 21 on the remote control
to select BT (Bluetooth) mode. NO BT will
show on the display if the product is not paired
to any Bluetooth device.
Activate your Bluetooth device and select the
search mode. SBMS D30 B1 will appear
on your Bluetooth device. If you cannot
find the product, press the PAIR button 34
on the remote controlor press and hold the
button 15 or the
remote control. The product enters pairing
mode. The display shows PAIRING.
Select SBMS D30 B1 in the pairing list. After
successful pairing: The display shows BT and
the product emits acoustic signals.
Play music from the connected device.
To disconnect the Bluetooth function,
you can:
Switch to another function on the product;
Disable the function from your Bluetooth
device. The Bluetooth device will be
disconnected from the product.
Press and hold the
button 34 on the remote control.
The Bluetooth device will be disconnected
from the product.
NOTES:
Enter 0000 for the password if necessary.
If a connection exists, press the
PAIR button 34 on the remote control or
press and hold the
the pairing mode. The connection will be
interrupted. The display shows PAIRING.
If no other Bluetooth device pairs with the
product within 2 minutes, the product recovers
its previous connection.
The product also disconnects when your
38 GB/IE
button 42 on the
button 42 or the PAIR
button 42 to re-activate
device is moved beyond the operational
range.
If you want to reconnect your device to the
product, place it within the operational range.
If the device is moved beyond the operational
range, when it is brought back, check if the
device is still connected to the product.
When devices are connected, BT is shown on
the display.
If the connection is lost, the display shows NO
BT. Follow the instructions of this chapter to
pair your device to the product again.
˜ Listen to music from
Bluetooth device
If the connected Bluetooth device supports
Advanced Audio Distribution Profile (A2DP),
you can listen to the music stored on the device
through the product.
If the device also supports Audio Video Remote
Control Profile (AVRCP), you can use the product's
remote control to play music stored on the device.
Pair your device with the product.
Play music via your device (if it supports
A2DP).
Use the supplied remote control to control play
(if your device supports AVRCP).
Button Description
15 Press button to play.
Press button to pause playback.
42
Press button to resume playback
29 Press button to skip to the
/
previous / next track.
/
14
˜ FM operation
˜ Auto scan and save preset
stations
Fully unwind the FM aerial 48 . Place it in the
position that offers the best reception.
Press the button 7 or the
TUNER button 21 on the remote control to
select the FM mode.
Press and hold the PROG button 10 or the
PROG button 44 on the remote control to