emerio TFN-123006.1 Mode D'emploi page 5

TFN-123006.1
PARTS OF DESCRIPTION
A. Switch knob
B. Timer knob
C. Air outlet
D. Screws
E. Front base
F. Back base
G. Power cord
ASSEMBLY
1. Spin 3 screws out from the turnplate.
2. Fasten the back and front base together.
3. Align the base with turnplate and then spin into 3 screws.
4. Press the power cord into the line deduction.
CONTROL PANEL
A. Switch knob
OFF: Stop
1: Fan with low speed
2: Fan with medium speed
3: Fan with high speed
1 2 3 ------- Fan+ Oscillation
Oscillation angle: ≤80°
B. Timer knob
Position "ON": Timer function is off.
The working time can be set within 120 minutes by turning the knob. When the set time is over, the timer knob
- 4 -
EN