Bosch 06033D9002 Notice Originale page 20

20 | English
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for cutting, grinding, roughing
and brushing metal materials without the use of water.
A separate protective guard for cutting must be used when
cutting with bonded abrasives.
Sufficient dust extraction must be provided when cutting
stone.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Unlocking lever for protective guard
(2) Spindle lock button
(3) Direction of rotation arrow on housing
(4) On/off switch
(5) Battery charge indicator
(6) Battery a)
(7) Speed preselection thumbwheel
(8) Battery release button
a)
(9) Auxiliary handle (insulated gripping surface)
(10) Protective guard for grinding
(11) Mounting flange with O‑ring
(12) Grinding disc
(13) Protective guard for cutting
1 609 92A 7UY | (12.09.2022)
(14) Cutting disc
(15) Carbide grinding head
(16) Quick-clamping nut with bar
(17) Grinding spindle
(18) Hand guard
(19) Rubber sanding pad
(20) Abrasive disc
(21) Round nut
(22) Cup brush
(23) Handle (insulated gripping surface)
(24) Extraction guard for cutting with a cutting guide
(25) Diamond cutting disc
a) Accessories shown or described are not included with the
Technical Data
Angle grinder
Article number
Rated voltage
Rated speed
Speed adjustment range
Max. grinding disc diameter
Grinding spindle thread
Max. thread length of grind-
ing spindle
Constant electronic control
Speed preselection
Soft start
Restart protection
Overload protection
Weight according to EPTA-Procedure 01:2014
– with low-vibration auxili-
– with standard auxiliary
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
ure during operation
during storage
Recommended rechargeable
batteries
Recommended chargers
A) Measured at 20–25 °C with rechargeable battery PBA 18V
B) Depends on battery in use
C) Limited performance at temperatures <0 °C
D) The following chargers are not compatible with the PBA re-
a)
a)
a)
a)
a)
a)
a)
a)
a)
product as standard. You can find the complete selection of
accessories in our accessories range.
V=
A) min -1
min -1
mm
mm
kg
ary handle
kg
handle
°C
°C
C) and
D)
6.0Ah.
chargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV
a)
AdvancedGrind 18
3 603 CD9 0..
18
11500
2800–11500
125
M 14
21,7
●
●
●
●
●
B)
2.7 (2.5 Ah)–
3.2 (6.0 Ah)
2.4 (2.5 Ah)–
3.0 (6.0 Ah)
0 to +35
–20 to +50
PBA 18V...W-.
AL 18...
Bosch Power Tools