Publicité
Les langues disponibles
Les langues disponibles
Setscrew
Spout
Supply
Tube
Spout
Sleeve
Assembly
3. Install the Spout
CAUTION: Risk of product damage. Use care when installing
the spout assembly to prevent damage to the O-ring seal.
IMPORTANT! Keep the spout supply tube clean above the finished
deck to avoid damage to the O-ring seal.
Close the valves (hot = clockwise, cold = counterclockwise).
Apply a ring of plumbers putty or other sealant around the
underside of the spout base according to the manufacturer's
instructions.
Position the spout base over the spout supply tube and slide
down. Align the anti-twist screw with the drilled hole.
Carefully press down until the spout contacts the finished deck.
Tighten the setscrew.
Kohler Co.
Anti-Twist
Screw
Apply
plumbers
putty.
O-Ring
5
1011145-2-B
Publicité
