Ryobi ERGO-A2 Mode D'emploi page 18

arise and the operator should pay special
attention to avoid the following:
■
Damage to hearing caused by noise
Wear suitable hearing protection and
limit exposure.
■
Injury to the eyes
Wear protective eye shields or
goggles when using the product.
■
Injury caused by vibration
Limit exposure.
instructions in Risk Reduction.
■
Electric shock caused by contact with
hidden wires
Hold the product only by insulated
surfaces.
■
Injury caused by dust
Dust created
product can cause respiratory injury.
Wear appropriate dust control mask
with filters suitable for protecting
against particles from the material
being worked on.
RISK REDUCTION
It has been reported that vibrations
from handheld tools may contribute to
a condition called Raynaud's Syndrome
in certain individuals.
may include tingling, numbness, and
blanching of the fi ngers, usually apparent
upon exposure to cold. Hereditary
factors, exposure to cold and dampness,
diet, smoking, and work practices are all
thought to contribute to the development
of these symptoms. There are measures
that can be taken by the operator to
possibly reduce the eff ects of vibration:
■
Keep your body warm in cold
weather. When operating the unit,
wear gloves to keep the hands and
wrists warm. It is reported that cold
weather is a major factor contributing
to Raynaud's Syndrome.
■
After each period of operation,
3
Original Instructions
Follow the
by operating the
Symptoms
exercise to increase blood circulation.
■
Take frequent work breaks. Limit the
amount of exposure per day.
If you experience any of the symptoms
of this condition, immediately discontinue
use and see your doctor about these
symptoms.
WARNING
Injuries may be caused, or aggravated,
by prolonged use of a tool. When
using any tool for prolonged periods,
ensure you take regular breaks.
KNOW YOUR PRODUCT
See page 136.
1. Chuck
2. Screwdriver bit
3. Forward/reverse selector
4. Switch trigger
5. Handle, insulated gripping surface
6. Charger plug
7. USB port
8. Charger cable
9. Input jack
MAINTENANCE
WARNING
The product should
connected to a
when assembling
adjustments, cleaning,
maintenance, or when the product is
not in use. Disconnecting the product
will prevent accidental starting that
could cause serious injury.
■
When servicing, use only identical
replacement parts. Use of any other
parts may create a hazard or cause
product damage.
■
Avoid using solvents when cleaning
plastic parts. Most plastics are
never be
power supply
parts, making
performing